Products |
NEMA 23 Integrated Stepper Motor with Motion Controller
NEMA23/57mm integrated stepper motor with motion controller
INQUIRY a shipping cost to you right now and pay through Paypal.
Nema 23 stepping motor with UIM24004 integrated stepper drives
Holding Torque 178 oz.in
Holding Torque 268 oz.in
| Series Model | Step Angle (°) | Motor Length (mm) | Rated Current (A) | Phase Resistance (Ω) | Phase Inductance (mH) | Holding Torque (Kg.cm Min) | Rotor Inertia (g.cm²) | Lead Wire (NO.) | Motor Weight (g) |
| UIM57-a | 1.8 | 51 | 1 | 5.8 | 17 | 9 | 190 | 4 | 560 |
| UIM57-b | 1.8 | 56 | 2.8 | 0.9 | 2.5 | 12.6 | 300 | 4 | 700 |
| UIM57-c | 1.8 | 76 | 2.8 | 1.13 | 3.6 | 18.9 | 480 | 4 | 1000 |
| UIM57-d | 1.8 | 115 | 2.8 | 2.1 | 10 | 30 | 650 | 4 | 1800 |
Frame 23 stepper motors with different Torques for your applications.
UIM242 stepper controller is a microprocessor based single axis motion controller with an integrated bipolar stepper motor drive working standalone or integrally on stepper motor for networking. Through one CAN/RS232 Converter you can control at most 112 this integrated stepper motors with motion controllers by one PC synchronously or individually. An on-board bipolar ‘chopper’ stepper drive is provided capable of driving motors up to 4 per phase in both full, half, fourth and sixteenth micro stepping modes.
You could also use the Parallel port UIM240 stepper driver and Serial port UIM241 stepper controller for an integrated stepper motor.
More Products |
»
[Integrated Stepper Motor with Drives or Controller]
| 2011-10-05 |
»
[Integrated Stepper Motor with Drives or Controller]
| 2011-10-05 |
»
[Servo Stepper Motor]
| 2011-09-20 |
»
[Others]
| 2010-11-16 |
»
[Parallel Port Stepper Drives]
| 2010-11-09 |
»
[Serial Port Stepper Controller]
| 2011-06-08 |
»
[Network CANBus Stepper Controller]
| 2011-06-08 |
»
[Stepper Motor Velocity Driver]
| 2011-09-22 |
»
[V2 Stepper Motor Motion Controller]
| 2011-10-05 |
»
[V2 Stepper Motor Motion Controller]
| 2010-11-04 |
About Us |
Contact Us |
Search |