Products |
All (30)
Servo Stepper Motor (1)
Integrated Stepper Motor with Drives or Controller (4)
V2 Stepper Motor Motion Controller (2)
Parallel Port Stepper Drives (4)
Serial Port Stepper Controller (4)
Network CANBus Stepper Controller (4)
Stepper Motor Velocity Driver (2)
RS232 to CANBus Converter (2)
Integrated Stepping Gearmotors (2)
Integrated Stepper Motor Linear Actuators (0)
CANBus I/O Card (1)
Others (4)
NEMA 17 integrated stepper motor with drives
2011-10-05
NEMA17 integrated stepper motor with drives
INQUIRY a shipping cost to you right now and pay through Paypal.
Nema 17 stepping motor with UIM 24002 integrated stepper drives
Holding Torque 45 oz.in
Holding Torque 62 oz.in
Nema 17 stepping motor with UIM 24004 integrated stepper driver
Holding Torque 62 oz.in
More frame 17 hybrid bipolar stepping motors with different Rated Current and Holding Torque for your separate applications:
| Series Model | Step Angle (°) | Motor Length (mm) | Rated Current (A) | Phase Resistance (Ω) | Phase Inductance (mH) | Holding Torque (Kg.cm Min) | Rotor Inertia (g.cm²) | Lead Wire (NO.) | Motor Weight (g) |
| UIM42-a | 1.8 | 38 | 0.8 | 10 | 17 | 3.2 | 57 | 4 | 240 |
| UIM42-b | 1.8 | 47 | 1.2 | 3.2 | 5.0 | 4.4 | 68 | 4 | 350 |
| UIM42-c | 1.8 | 47 | 1.68 | 1.7 | 2.8 | 4.4 | 68 | 4 | 350 |
| UIM42-d | 1.8 | 60 | 2.1 | 1.6 | 3 | 6.5 | 82 | 4 | 450 |
UIM42-a and UIM42-b stepper motors could use a UIM24002 stepper motor driver to building up an integrated stepper motor
UIM42-c stepper motor could use a UIM24002 or a UIM24004 stepper motor driver for an integrated stepper motor
UIM42-d stepper motor is corresponding to a UIM24004 stepper motor driver
You have to consider at least two parameters of a stepper motor to choose the right UIM stepper motor driver for an integrated stepper motor: the Rated Current and the Torque
UIM24002 adopt 10-35V DC power supply and supply 0-2 amps settable output current.
UIM24004 adopt 12-40V DC power supply and supply 1.5-4 amps adjustable output current.
The UIM24004 performs much better than UIM24002, the temperature of UIM24004 after a 8 hours continuous working is about 50 degree Celsius and the UIM24002 could reach about 60 degree Celsius which is among their working environment. The working condition influence a bit on the temperature of the stepper motor driver: if there is a big metal module on your machine for mounting the stepper motor or working with pause, the temperature of the integrated stepper motor will go down.
Besides this Parallel port stepper driver, you could also use UIM241 Serial port with RS232 interface and UIM242 CANBus networking stepper controllers to build up an integrated stepper motor.
More Products |
»
[Integrated Stepper Motor with Drives or Controller]
| 2011-10-05 |
»
[Integrated Stepper Motor with Drives or Controller]
| 2011-10-05 |
»
[Servo Stepper Motor]
| 2011-09-20 |
»
[Others]
| 2010-11-16 |
»
[Parallel Port Stepper Drives]
| 2010-11-09 |
»
[Serial Port Stepper Controller]
| 2011-06-08 |
»
[Network CANBus Stepper Controller]
| 2011-06-08 |
»
[Stepper Motor Velocity Driver]
| 2011-09-22 |
»
[V2 Stepper Motor Motion Controller]
| 2011-10-05 |
»
[V2 Stepper Motor Motion Controller]
| 2010-11-04 |
About Us |
United Intelligence Robot Technology., LLC is a high-tech enterprise registered in the Pudong Zhangjiang Hi-Tech Park, UIROBOT is committed to devote to the development of robotic industry. Our robotic products have full independent intellectual property rights, and are protected under multiple dome... More »
Contact Us |
Tel: 0086-21-33925935
Fax: 0086-21-33925935
Sales: International Sales
Email: inquiry@uirobot.com
Address: B104, No. 456 Bibo Road, Zhangjiang Hi-Tech Park, Pudong, 201203 Shanghai.
Website: en.uirobot.com
Search |